Why is the motor industry so fond of gray cast iron?
Gray cast iron refers to cast iron with flake graphite. Because this material breaks when the fracture is dark gray, it is called gray cast iron. The main components of gray cast iron are iron, carbon, silicon, manganese, sulfur and phosphorus. It is the most widely used cast iron, and its output accounts for more than 80% of the total output of cast iron.
Ductile iron is obtained by spheroidizing and inoculation to obtain spheroidal graphite, which effectively improves the mechanical properties of cast iron, especially the plasticity and toughness, thereby obtaining higher strength than carbon steel. Ductile iron is a kind of high-strength cast iron material developed in the 1950s. Its comprehensive performance is close to that of steel. It is based on its excellent performance and has been successfully used for casting some complex forces, strength, toughness and wear resistance. Parts with higher requirements. Ductile iron has rapidly developed into a widely used cast iron material after gray cast iron.
The castings of motor products are mainly gray cast iron, but the end caps of high-voltage motor bearing sleeves and special-purpose motors will use ductile iron, but the price of ductile iron is relatively more expensive than gray cast iron.

The difference between cast iron and ductile iron
● Graphite shape. The graphite in the gray cast iron structure exists in the form of flakes, and the graphite in the ductile cast iron structure exists in a spherical shape.
● Performance differences. The flake graphite in the gray cast iron splits the matrix, causing stress concentration, resulting in low strength and plasticity, large brittleness, but good vibration damping performance. It is mainly used to produce a variety of cabinets, bases, etc., which are not required for high strength and are mainly subjected to compressive stress, such as small and medium-sized motor bases and end covers.
The spherical graphite in ductile cast iron has the lowest splitting effect on the matrix and the least stress concentration, so its strength is very high, it can be comparable with medium carbon steel, can fully exert the performance of the matrix, and has certain plasticity and good toughness. It is often used to make parts with high toughness and complex shapes, and its casting performance is better than steel. Such as internal combustion engine crankshafts, connecting rods and the like.
● Strength performance. Ductile iron can also generally be heat treated for reinforcement, while gray cast iron is generally not heat treated to increase strength. Compared with cast iron, ductile iron has an absolute advantage in terms of strength. The tensile strength of ductile iron is 60k, while the tensile strength of cast iron is only 31k. The yield strength of ductile iron is 40k, while cast iron does not show yield strength and eventually breaks. Ductile iron is much stronger than cast iron.
● Corrosion resistance. Ductile iron is the same as cast iron in terms of corrosion resistance.
If you want to buy a household appliance motor, please pay attention to Power Tool Motor and Mini Gear Motor.





