Why does the juicer motor choose a brushless motor?

Why does the juicer motor choose a brushless motor?

With the continuous improvement of home appliances and the continuous improvement and innovation of technology, there are also some relatively high requirements for the selection of accessories. The general juicer on the market uses a brushed motor, and such a choice cannot improve the use value of the product. , Most manufacturers consider that the manufacturing cost of the product ignores the use value of consumers, and the brushless motor greatly improves the use value of the juicer, as the so-called good saddle matches a good horse. Let's analyze the advantages of the brushless motor of the juicer.

1. The brushless motor can achieve a constant speed in different gears, which avoids the shortcoming of the speed reduction caused by the increase of the load, and can further improve the effect of the juicer.

2. Compared with the brushless motor, the noise of the brushless motor is dozens of times lower than that of the brushed motor. The ordinary brushed motor has a very large noise due to mechanical friction, and the brushless motor does not have mechanical friction, so the noise is greatly reduced, and the squeeze High juice rate.

3. The efficiency of the brushless motor of the juicer is high, the efficiency of the brushed motor is only 30%-40%, and the efficiency of the brushless motor can reach 70%-85%.

4. The brushless motor of the juicer has a long life. The brushes of the brushed motor are easy to wear and tear, and the lifespan is only a few hundred to 1000 hours, while the lifespan of the brushless motor is at least 8000H, or even tens of thousands of hours.

So which brushless motor should I choose for the juicer motor application?

BLDC80 is recommended for the selection of the brushless motor of the juicer. In terms of motor performance, the voltage is 100-220V (can be used as low voltage), the power is 500-1500W (can be customized), the speed is 15000-20000rpm, the outer diameter (can be customized) is 80mm, and the motor The fuselage is 106mm, and the driver can be internal/external according to user requirements. It is mainly used in juicers, wall breakers, and cooking machines. The motor can also be customized according to the application.