Things to be aware of when disassembling the 110v dc motor
Whether it is a person who specializes in the motor industry, or a moment of interest, when disassembling a DC motor, it is necessary to prepare in advance, especially at a critical moment, and will never allow any scorpion. Then, in the following, we will pay attention to the matters needing attention when disassembling the 110v dc motor
Disassembly considerations:
1. Remove the pulley or coupling on the shaft of the DC geared motor.
2. When removing the motor with the brush, remove the brush from the brush holder.
3. Remove the external wiring of the DC gear motor and mark it.
4. When the rotor is pulled out, care must be taken not to damage the stator coil. The weight of the rotor is not heavy, and the weight can be relied on by foreign objects.
5. For motors equipped with rolling bearings, first remove the bearing cover, then loosen the fastening screws of the end cover, and mark the joint between the end cover and the base of the base.
