Nov 13, 2018 Leave a message

Shaped sander system solution

System solutions

The system is mainly composed of HMI, EP1 series PLC, six E550 inverters and motor encoders. The machine tool consists of five working stations: disc sand 1, disc sand 2, disc sand 3, wool sand roller 1, and wool sand roller. Each station can be controlled separately, and the stepless speed regulation is realized by MODBUS communication protocol. The five stations can also work in any combination according to the needs of the site; the pressing part is controlled by the PLC to accurately control the pressing height by the encoder signal, and the position accuracy of the pressing position can reach 0.1mm; the feeding part is adjusted by the E550 inverter to the conveyor belt. To ensure that the feeding mechanism is stable and reliable.

Process requirements

1. Six inverters communicate with PLC through RS485, requiring 1S to start and stop;

2. Five stations can be controlled separately, and automatic manual switching is convenient;

3. The position accuracy of the main lifting motor is 0.1mm;

4. The running speed of each station can be adjusted at any time;

5. The system has a high degree of automation and is stable and reliable.

3

Send Inquiry

whatsapp

teams

E-mail

Inquiry