First, the fan rotor part:
Including the fan blade, which is the core for generating air flow and the axis of the cooling fan, it is used to support the rolling of the balance fan blade, the rotor magnetic ring, the permanent magnet, the key to switch the speed of the propulsion magnetic stage, the outer frame of the magnetic ring, and the fixed magnetic ring.
Second, the fan stator part:
Including supporting springs, separating bearings to balance shafts and bearings, providing high speed, low friction, long-life rotation, retaining rings, fixing the nodules to rotate the entire component, motor part, producing the direction of rotation, and the size of the active rotation speed is critical.
Third, the cooling fan frame:
It plays the role of supporting the fan motor and guiding the flow.
Fourth, the fan motor part
Including circuit board, control energy consumption and signal input and output, silicon steel sheet (ie stator magnet, with winding coil attached) to generate magnetic stage propulsion switching, silicon steel sheet upper and lower covers, fixing and insulator.
② Basic knowledge of cooling fans
First, the size of the fan:
The size of the fan is generally expressed by the length of the outer side of the fan and the thickness of the product, and the unit is mm. The specifications and models of fans are often numbered by size, for example: 6010 in AD6010 represents the size of the product 60*60*10MM.
Product number
Second, rated voltage: it is the voltage value of the fan under rated operation. Common DC fan voltages are generally 5V, 12V, 24V, 48V and other specifications.
Third, the fan speed: the speed of the fan rotation, the unit is rpm (revolution per minute), which is a relatively important parameter of the fan. (U), high (H), medium (M), low (L) and other speed products for users to choose and use according to their own conditions. Product parameters
Fourth, air volume: a quantitative index to measure the capacity of a fan, the unit is cubic feet per minute (CFM), but in some places the unit is cubic meters per minute (CMM), 1CMM=35.31CFM.
Air volume
Fifth, wind pressure: the ability of Peugeot Zhifeng flow to overcome wind resistance. This indicator directly affects the effect of ventilation or heat dissipation. The unit is mm-H2O. In some places, the unit is inH2O, 1mmH2O=0.03939inH2O.
Sixth, noise value: It is an important parameter. Although it has nothing to do with the effect of ventilation and heat dissipation, it has high requirements for the use of different environments. The unit is dBA (decibel).
Seventh, bearing system: This configuration is the soul component of the fan, which is directly related to the mechanical life of the product. Often divided into ball bearings and oil-impregnated bearings.
Eighth, connector: It is a relatively important detail component on the fan, which is easily ignored by everyone. It is often divided into unprovoked, 2P, 3P, large 4P and other forward and reverse.
③The circuit of the DC brushless fan
Micro DC motors are widely used in household appliances, especially in computers, which are widely used for exhaust cooling. This new type of DC fan adopts a brushless structure, which overcomes the easy wear and tear of traditional commutator type (brush) motors. Disadvantages such as loud noise and short life. Several kinds of fan circuits drawn according to the real object
④ Principle of brushless DC fan
The designed pulse generator based on Hall element has simple structure and good performance. There is a relatively harsh electromagnetic environment in the locomotive electrical system, so the product itself is required to have strong anti-interference ability.
The brushless DC fan is driven by a brushless motor and has no electromagnetic interference. It completely overcomes the electromagnetic interference, high noise and short mechanical life of the brushed commutation motor. It is widely used in electronic and electrician applications where forced heat dissipation is required.
Such as the working principle of Hall switch, AX277 Hall switch circuit AX277 Hall switch integrated circuit is a monolithic semiconductor integrated circuit. The circuit consists of seven parts: reverse voltage protector, precision voltage regulator, Hall voltage generator, differential amplifier, Schmitt trigger, temperature compensator and complementary open collector output. It has a working voltage range Wide, high magnetic sensitivity, strong load and reverse protection capabilities. This circuit is ideal for brushless fans due to its up to 300 mA load capability and complementary outputs.
First, the frame and impeller are made of plastic "PBT+30% glass fiber" which is safe, healthy and durable.
(1) PBT: that is, polybutylene terephthalate. Because of its special properties, PBT is an ideal material for special applications in electrical engineering and electronics.
1. Mechanical properties: high strength, fatigue resistance, dimensional stability, and small creep (very little change under high temperature conditions);
2. Heat aging resistance: The enhanced UL temperature index reaches 120~140℃ (outdoor long-term aging is also very good)
3. Solvent resistance: no stress cracking
4. Water stability: PBT is not easy to decompose in contact with water
5. Insulation performance: excellent (wet and high temperature can keep the electrical performance stable)
(2) Glass fiber: (English name: glassfiber) is an inorganic non-metallic material with excellent performance. It is made of pyrophyllite, quartz sand, limestone, dolomite, borosite and borosite as raw materials through high temperature melting, wire drawing, winding, weaving and other processes. The diameter of its monofilament is several Micron to twenty microns, equivalent to 1/20-1/5 of a hair, each bundle of fiber strands is composed of hundreds or even thousands of monofilaments. Within the controllable range, glass fiber products are relatively environmentally friendly.
1. High temperature resistance
After testing, it has no effect on the strength of glass fiber when the temperature reaches 300 °C
2. High tensile strength
The tensile strength of glass fiber is 6.3~6.9g/d in standard state and 5.4~5.8g/d in wet state.
3. Good electrical insulation
Glass fiber has excellent electrical insulation, is an advanced electrical insulation material, and is also used for thermal insulation materials and fire shielding materials.
4. Burn
Glass fiber can be melted into glass-like beads at high temperature, which meets the requirements of fire prevention and control in the construction industry
5. Good sound insulation
The combination of glass fiber and gypsum can achieve a good sound insulation effect
Second, the bearing type used is double ball bearing (MR52ZZ)
Double ball bearing
Ball bearing (MR52ZZ)
Ball Bearing changes the friction mode of the bearing, adopts rolling friction, and there are some steel balls or steel columns between the two iron rings, supplemented by some grease lubrication. This method more effectively reduces the friction between the bearing surfaces, effectively improves the service life of the fan bearing, and thus reduces the heat generation of the radiator, low noise, low vibration, low friction, high precision, High sealing, high running, long life, no abnormal sound. Double balls are more high-end bearings. The rolling friction method is used, and two ball bearings are used. There are several small steel balls in the bearings surrounding the shaft. When the fan or shaft rotates at a high speed, the steel balls follow the rotation. The advantage of double ball bearings is their long life. Good aging resistance, suitable for fans with high speed.
Three, 11 high-speed fan blades
11 high-speed fan blades
Using 11 fan blades, ventilation and heat dissipation, strong operation and outstanding effect. The increase of fan blades has an impact on the air volume. At the same speed, the more the fan blades, the more air volume, the fan blades will divide the airflow into multiple parts, and the pressure of the airflow on the fan blades will decrease.






