Why is the motor structural part subject to aging?
During the actual production and processing of the motor, the deformation or crack of the base or the end cover is encountered from time to time. The crack problem is mostly manifested on the casting, especially for the drilling part, the probability of this problem is much larger; A relatively concentrated feature is that in cold weather conditions, the problem is relatively concentrated. Why are these problems, Ms. Participate in the simple analysis of the reasons for the deformation of the casting and the aging treatment.
1. Reasons for deformation of castings
The deformation of the casting generally refers to the overall deformation. Common deformations include warping, bending, bending, and the like. The main reasons for the deformation include: ● The structural design of the casting itself is unreasonable, and deformation occurs due to solidification and shrinkage. ● The casting mold structure is unreasonable; ● During the demoulding process, the casting temperature is too high, the demolding structure is not good, the impact is unbalanced during demolding, and the casting is deformed. ●The mold is produced, but it has not reached the extent that the casting can not be removed, and deformation will occur during demolding. ● The gate and drain system are unreasonably arranged, causing deformation during shrinkage.
2. Analysis of the principle of aging
The aging treatment is to store the material at room temperature or at a higher temperature for a longer period of time to produce an aging process. Aging treatment refers to a heat treatment process in which a metal or alloy workpiece is solution-treated, and after being subjected to high-temperature quenching or after a certain degree of cold-working deformation, it is placed at a higher temperature or room temperature to maintain its shape and size, and the performance changes with time.
Generally speaking, after aging, the hardness and strength are increased, and the plastic toughness and internal stress are reduced. Steels with higher carbon content obtain high hardness immediately after quenching, but their plasticity becomes very low. After the quenching of the aluminum alloy, the strength or hardness does not immediately reach the peak, and the plasticity does not decrease, but instead increases.
After a considerable period of room temperature, the strength and hardness of the quenched alloy are significantly increased, while the plasticity is decreased. The strength and hardness of such a quenched alloy change significantly with time, which is called aging. The aging effect at room temperature is called natural aging, and the aging at a certain temperature is called artificial aging.
For artificial aging treatment, the heating temperature and holding time must be strictly controlled to obtain an ideal strengthening effect. Partial aging is sometimes used in production, that is, it is kept at room temperature or slightly higher than room temperature for a certain period of time, and then kept at a higher temperature for a further period of time. This will get better results.

3. What is solid solution treatment?
The solution treatment refers to a heat treatment process in which the alloy is heated to a high temperature single-phase zone at a constant temperature to allow the excess phase to be sufficiently dissolved in the solid solution and then rapidly cooled to obtain a supersaturated solid solution.
Because the operation process is similar to quenching, it is also called "solution hardening". It is suitable for alloys in which the solid solution is used as a matrix and the solubility changes greatly when the temperature changes. The alloy is first heated to a temperature above the solubility curve and at a suitable temperature below the solidus line for a certain period of time to dissolve the second phase into the solid solution. It is then rapidly cooled in water or other medium to inhibit re-precipitation of the second phase to obtain a supersaturated solid solution at room temperature or a solid solution phase which is usually only present at elevated temperatures. Since it is thermodynamically metastable, desolvation or other transformation will occur under appropriate temperature or stress conditions. It is generally a preliminary heat treatment and its role is to prepare optimum conditions for subsequent heat treatment.





