Jan 30, 2019 Leave a message

Wheel Motors Are Used In Electric Vehicles. Why Is The Center Motor Used Very Little?

Wheel motors are used in electric vehicles. Why is the center motor used very little?

The electric vehicles we ride every day usually use hub motors. Almost rarely see the electric motors of the center-mounted motors. Where is the hub motor better than the center-mounted motors? Why are manufacturers more willing to produce hub motor products instead of center motors?

The hub motor is a motor that is installed on the rear wheel of the electric vehicle. It usually uses a brushless motor. The structure of the hub motor is simple. It is usually composed of coils, shafts, magnets and outer casings. Under the action of current, positive and negative. The pole magnet sheet generates a huge current magnetic field. Under the push of current, the middle shaft is running at a high speed. Due to the simple structure, the failure rate of the hub motor is relatively low. In addition, the kinetic energy conversion rate of the hub motor is currently about 80%.

The structure of the center motor is much more complicated than that of the hub motor. In addition to the motor, the center motor requires clutch, transmission shaft, transmission chain, transmission, differential and other components to output power to the rear wheels. These components are not only The weight of the center-mounted motor is reduced, and the number of components is large, which makes the failure rate much higher. It requires regular maintenance and maintenance, and the modification is also more difficult!

01

The center motor also has its own powerful advantages. The center motor can be used for shifting conditions, and the steering feel is good. At the same time, the torque is large, the acceleration is fast, the climbing ability is strong, and the center of gravity of the center motor is in the middle of the vehicle. When the vehicle is driving fast, it can play. The function of front and rear balance, for front and rear shock absorption, the load bearing is relatively balanced, can complete high-speed bending and other actions, the maximum speed can reach 100 kilometers, is a violent motor.

Due to the self-weight of the hub motor, the rear shock absorber is subjected to more pressure during the running process. In order to balance the vehicle, the lead-acid battery has to be installed under the seat bucket to balance the vehicle. In addition, due to the high speed running of the hub motor, the inertia generated by the self-weight is difficult to brake by the motor vacuum pump, and it needs to be braked by an external force such as a brake disc. Therefore, the braking effect of the motor is not as good as that of the center motor.

02

Speaking of cost, this may be the most important factor in determining the market of electric motors for wheel hub motors. The cost of ordinary wheel hub motors is only 200 yuan. The price of automakers is about 300 yuan. Motors with more than 500 yuan have kinetic energy. The function of recycling, but a set of mid-mounted motor systems, including differentials, gearboxes, clutches, etc., costs at least 1,000 yuan, which is unbearable for many electric vehicle manufacturers, only some sports. The brand, which specializes in the production of sports-type electric vehicles, is equipped with a central motor. Usually the price of the whole vehicle is as high as 10,000 yuan or more, and ordinary users do not have to buy such expensive electric vehicles.

In addition, the hub motor is more suitable for low-speed commuting below 40km/h, while the mid-mounted motor model is for sports. The positioning of the two is different.


Send Inquiry

whatsapp

teams

E-mail

Inquiry