The difference between servo motor stepper motor
1. Servo is high speed and low torque, stepping is low speed and high torque
In general, the servo can easily reach several thousand rated speeds. For example, the small power servo, that is, the servo within 750W, the Japanese servo is rated at 3000 rpm, while the European servo can even reach 5000 rpm and 6000 rpm. Stepping, due to its own characteristics, is generally five or six hundred turns. However, its torque is much larger than the servo of the same specification, and the reducer can be omitted. In fact, the stepping is rarely a speed reducer, just a few hundred speeds, plus a speed reducer, that is really useless.
2. The servo flange is complete and the step flange is not integral.
The servo flanges are all multiples of 10, such as 40, 60, 80, 110, 180, etc., and the stepping is generally 42, 57, 86, etc., often 42 steps are heard at the engineering site, 57 steps means flange size. The stepping and servo flanges are not a series, which is an important factor in distinguishing between servo and stepping.
3. Servo acceleration time can be ignored, step can not be ignored
The acceleration time of the servo is only a few milliseconds, which is completely negligible. The acceleration time of the stepping motor is several hundred milliseconds. Don't underestimate this gap. Although we can't feel it with intuition, it has a beat to the mechanical equipment. Critical impact.
4. Servo overload capability is strong, and there is almost no overload capability in stepping.
Servo motors generally have overload capabilities such as 180%, 300%, etc., while stepping has almost no overload capability.
5. Servo price is high, stepping is cheap
This is not to say, if the weight alone, the price of stepping and scrap copper is almost the same, and the servo is relatively expensive. Stepping is mainly used in places where the speed is not high, and it is not frequently started and stopped, especially in places where the installation space is small. Even, we can treat the stepping as a cylinder. The servo, the use of the occasion is obviously more extensive than the stepping, such as frequent start and stop, various high-speed equipment.
If you want to buy a food processing processor motor, please pay attention to kitchen appliances motor.





