China Smart Meter Motor Suppliers

China Smart Meter Motor suppliers，Teamwork Global Group.The following is the introduction of the deceleration motor. The deceleration motor is characterized by high efficiency and reliability, long working life, simple maintenance and wide application.Its series can be divided into single stage, two stage and three stage gear deceleration motor, the installation arrangement is mainly expansion type, coaxial type and shunt type. 1. In the expansion of the two-stage cylindrical deceleration motor, the gear position relative to the support position is asymmetric. When the shaft is deformed, the load is not distributed evenly in the tooth width, so the shaft should be designed to have a large stiffness and keep the gear away from the input or output end. Two, the characteristics of the two levels of cylindrical motor shunt: shunt motor extension shaft position can be extended by either side, facilitate the overall configuration of the machine, shunt stage gear are oblique teeth, spin right, side left, to offset the axial force, should make one of the shaft can do slightly axial swimming, so as not to jam gear. 3. Characteristics of coaxial deceleration motor: the radial size is compact, but the axial size is large.Because the middle axis is large, the shaft disturbance during load is large, so the load concentration along the tooth width is more serious.At the same time, because the center of the two-stage gears must be consistent, so it is difficult to make full use of the bearing capacity of the two-stage gear, and the bearing lubrication located in the middle part of the deceleration is also more difficult.The input and output ends of the deceleration motor are located at both ends of the same axis, limiting the overall configuration of the drive device.