China 3 phase induction motor factory says three-phase asynchronous motor
Rotor windings of three-phase asynchronous motor
Effect: Cutting the stator rotating magnetic field produces induced electromotive force and current, and forms an electromagnetic torque that rotates the motor. Construction: divided into rat cage rotor and winding rotor.
(1) Caged rotor: The rotor winding consists of multiple leads inserted into the rotor slot and two loop end rings. If the rotor iron center is removed, the shape of the entire winding is like a rat cage, so it is called a cage winding. Small cage Motors use cast aluminum rotor windings, and copper bars and copper end rings are used for motors above 100KW.
The mouse cage rotor is divided into: impedance rotor, single mouse cage rotor, double mouse cage rotor, deep groove rotor, starting torque and other characteristics are different.
(2) Line rotor: The winding of the winding rotor is similar to that of the stator winding, and it is also a symmetrical three-phase winding. Generally, it is connected to a star shape. The three qualifying heads are connected to the three collector rings of the shaft, and then the brush is connected to the outer circuit.
Features: The structure is more complex, so winding motors are not as widely used as cage Motors. However, through the collection ring and the electric brush, additional resistors and other elements are inserted into the rotor winding loop to improve the starting, braking performance and speed adjustment performance of the asynchronous motor. Therefore, equipment that requires smooth speed adjustment within a certain range is required. Such as cranes, elevators, air compressors, etc..






