The vacuum cleaner makes it easier for us to clean the room, and it is cleaner than what we need to clean directly, and it can also take care of some dead spots and dust, hair, etc. that are not easy to clean. When we use the vacuum cleaner, we should pay attention to the correct operation method, so what is the reason for the leakage of the vacuum cleaner when using it?
What's the matter with the leak of the vacuum cleaner?
First, the casing leaks
The main reason for the leakage of the casing is the insulation failure of the vacuum cleaner motor. If such problems occur, we should insulate the vacuum cleaner after it dries. If it still doesn't work, the motor needs to be replaced.
Second, the motor does not run
If the vacuum is activated, the motor does not run directly, or the vacuum plug is in poor contact, the circuit is incorrect, or the vacuum motor is faulty. Open the inside of the vacuum cleaner motor and check for burnt or badly worn vacuum cleaner brushes. If yes, please replace it in time.
3. The whole machine does not work
When the vacuum is turned on, the entire vacuum is cut off completely, so the fuse in the vacuum is likely to blow out. The solution is to replace the fuse. The vacuum cleaner motor can also be damaged and the entire vacuum cleaner motor may need to be replaced before it can be used.
4. Interfering with TV and computer
In the process of using the vacuum cleaner, we sometimes find that the radio and TV around us make noise, which is mainly caused by the poor contact between the motor of the vacuum cleaner and the commutator.
Can the vacuum cleaner suck water?
It depends on whether the vacuum cleaner has the function of absorbing water. If it is just a vacuum cleaner for vacuuming, it cannot absorb water. Dust in the vacuum cleaner can clog the motor or water can pass through the motor's windings and cause electrical damage. If you want to use a vacuum cleaner to absorb water, you must use a vacuum cleaner with a suction filter. Nowadays, the technology is advanced, and many vacuum cleaners have the function of absorbing water.
Tips for using vacuum cleaners
1. Do not use the vacuum cleaner to absorb gasoline, banana water, flaming cigarette butts, broken glass, needles, nails, etc., and do not absorb moisture, liquid, sticky matter, dust containing metal powder, so as to avoid damage to the vacuum cleaner and accidents.
2. When using the vacuum cleaner, handle it with care to avoid impact. After use, the sundries in the bucket, all vacuum accessories, dust bags, etc. should be cleaned up in time. And clean after each work, check for perforation or air leakage, and thoroughly clean the dust collector and dust bag with detergent and warm water, and air dry, do not use undried dust collector and dust bag.
3. In the process of use, once it is found that the hose is blocked by foreign objects, it should be stopped immediately for inspection, and the foreign objects can be removed before continuing to use. When using, fix the hose, nozzle and connecting rod interface, especially the nozzle with small clearance, floor brush, etc., pay special attention. Be careful not to fold the hose frequently, do not overstretch or bend it, and store the vacuum cleaner in a ventilated and dry place.
4. If it is used for a long time, it should be stopped every half an hour. Generally, continuous work should not exceed 2 hours. Otherwise, continuous operation will cause the motor to overheat. If the machine does not have automatic cooling protection, it is easy to burn out the motor and affect the service life of the machine. If the main unit heats up, emits a burnt smell, or has abnormal vibration and noise, it should be repaired in time.
