Reasons why the washing machine dehydration sound is particularly loud: the motor bearing is damaged and stuck, there are metal objects on the clothes, the place where the washing machine is placed is uneven, the clothes are placed on the side, the clothes are too much, the brake wire is broken, the motor coil is short-circuited, the starting capacitor is damaged, and the motor bearing is damaged. Or drive shaft problems, belts too tight, loose fasteners, damaged balance boom.
The motor bearing is damaged and stuck
If the motor bearing is damaged and stuck, it will also cause a buzzing sound when the washing machine is spinning. In this case, the washing machine motor needs to be disassembled and replaced with a new bearing.
metal objects on clothes
When dehydrating, first check if there is any metal object on the clothes. If there is, it is recommended to take it out. If it is a hanging ornament, it is recommended to dry or wash it in turn.
The place where the washing machine is placed is uneven
Please check whether the dehydrator is level, it may be that the place where the washing machine is placed is uneven, you can change it to a slightly flat place, or adjust the balance knob under the washing machine to adjust.
Clothes are skewed
Check to see if the clothes are skewed. If they are skewed, the dehydration will be uneven, and the laundry tub will shake and make a sound.
too many clothes
Please check whether the clothes are too full. Do not take a lot of clothes to dry at one time, which will cause the washing machine to not spin properly.
Broken brake line
If the brake cable is broken or the cover is not closed, you will find that the washing machine is difficult to start and makes a humming sound. During maintenance, you need to check the brake cable, reconnect the broken brake cable, and then start the operation after the cover is closed.
Motor coil turn-to-turn short circuit
If there is a short circuit between turns of the motor coil, which will cause difficulty in starting, it will also emit a humming sound, which can only be replaced with a brand new motor.
Damaged start capacitor
If the starting capacitor is damaged or its capacity is reduced, it will cause the humming sound of the motor not starting. When repairing, it is necessary to check whether the capacity of the starting capacitor is invalid. If it is damaged, replace it in time. When replacing, pay attention to its original withstand voltage value and capacity parameters to ensure the same.
Motor bearing or drive shaft problems
When the washing machine has been used for a long time, or the quality is inferior, this problem is prone to occur. The bearing of the washing machine motor is damaged or worn. Although the motor can still be used, it will produce a lot of noise.
Belt is too tight
Some washing machine belts are too tight, and such belts will affect the balance of the washing machine drum during rotation, especially if the drum of the drum washing machine is unbalanced, noise will occur.
loose firmware
When a certain firmware of the washing machine, especially the front-loading washing machine, is loose, the front-loading washing machine will generate noise during dehydration for a long time. At this time, it is time to replace the firmware in time.
Damaged balance boom
The front-load washing machine will have a balance boom. If the balance boom of the front-load washing machine is damaged, displaced and deformed, there may be a huge impact sound when the washing machine rotates.
The washing machine makes a loud noise when dehydrating, the suggested solution:
The buzzing is loud when dehydrated. This noise occurs because the clearance between the motor bearing and the shaft sleeve is too large, or the bearing is severely worn. In addition, it may also be caused by the looseness of the fixed nut of the drive pulley, which may cause the pulley to swing, and it may also be caused by the improper placement of the pulsator.
Makes noise when dehydrated. Check the clothes for metal buttons or other small metal objects that make a loud noise when they hit the inner wall of the barrel. If so, remove the metal objects or hide them in the clothes.
Makes a clicking sound. This is that small things such as coins have fallen under the washing pulsator. It is necessary to remove the washing pulsator for inspection and take out the foreign objects.
The loud noise may be caused by the failure of the clutch spring, which causes the washing machine to make a lot of noise. You only need to replace the clutch spring.
During dehydration, the sound is loud and accompanied by the beating of the washing machine body, which is caused by the uneven placement of the clothes, or it may be caused by the leakage of the dehydration balance ring in the inner cylinder. We just need to relocate the clothes.
