The working principle of brushless DC permanent magnet motor
In a brushless DC hydromagnetic motor, an armature winding is disposed on a stator, and a hydromagnet pole is disposed on the rotor. The position of the armature windings of the stator phases relative to the permanent magnet magnetic field of the rotor is sensed by the rotor position sensor electronically or electromagnetically; and the output signal is used to drive and armature windings according to a certain logic program through the electronic commutation circuit. Connect the corresponding power switching transistors to switch or commutate the current to the corresponding armature winding. As the rotor rotates, the rotor position sensor continuously sends out a signal, causing the armature windings to be continuously energized in sequence, constantly changing the energization state, so that the direction of the current flowing in the coil conductor under a certain magnetic pole is always unchanged. It is the essence of the contactless electronic commutation process of brushless DC permanent magnet motor.

We can imagine that in a brushed DC permanent magnet motor, if the rotating armature originally inside the motor is turned out into a stator, all the lead legs of the armature winding connected to the mechanical commutator are extracted, and A power transistor switch is provided for each lead head; and a static permanent magnet that is originally externally moved into the inner cavity of the motor becomes a rotor, and a brushed DC permanent magnet motor can be converted into a brushless DC permanent magnet. electric motor. However, this implementation method must include a large number of power transistor switching elements and a suitable rotor position sensor. According to the current state of the art, this method is difficult to implement, or has no practical value. Therefore, in the current brushless DC permanent magnet motor, the stator armature adopts a three-phase winding similar to that in a general AC motor, and the relative position between the rotor permanent magnet magnetic field and the stator armature winding three-phase axis is detected by the rotor position sensor. The spatial position, through the logic signal processing and control, to achieve the electronic commutation of the stator armature three-phase winding.
If you want to buy a fan motor, please pay attention to Bathroom Fan Motor.





