A vacuum cleaner may look complicated, but a traditional vacuum cleaner actually consists of just six basic parts:
. One air inlet, which may contain several cleaning accessories
.An air vent
.An electric motor
.A fan
. A porous dust collecting bag
.One housing to hold all other components
When you plug in your vacuum cleaner and turn it on, the following things happen:
The current controls the motor operation. A fan is attached to the motor, and the fan blades are angled, just like the propellers of an airplane.
When the fan blades rotate, they push air all the way to the exhaust port.
When the air particles are pushed forward, the particle density in front of the fan will increase and the air pressure will increase correspondingly, while the particle density behind the fan will decrease.
The pressure drop behind the fan is similar to the pressure drop in the straw when you suck a drink. The pressure behind the fan is lower than the pressure outside the vacuum cleaner, that is, the ambient air pressure. This creates suction inside the vacuum cleaner, a partial vacuum. So the air outside the vacuum cleaner automatically enters the vacuum cleaner through the air intake.
The suction power of a vacuum cleaner is determined by several factors. The strength of suction depends on several factors:
1. Fan power: The higher the engine speed, the stronger the suction.
2. Resistance of the air passage: if a large amount of debris is accumulated in the dust collection bag, the resistance encountered by the air discharge will be increased. The increased drag causes each air particle to move more slowly. This is why the vacuum cleaner works better when you have just replaced the dust bag.
3. The size of the end opening of the air inlet: because the speed of the vacuum cleaner fan is constant, the amount of air passing through the vacuum cleaner per unit time is certain. The same amount of air enters the vacuum every second, regardless of the size of the intake. If the inlet size is smaller, each air particle moves faster. According to Bernoulli's principle, an increase in air speed leads to a decrease in pressure, which leads to an increase in suction at the intake. Therefore, the narrow vacuum cleaner attachment can produce more suction, than the opening of the large attachment can inhale heavier dirt.






