The effect of the injection molding machine after the transformation
Third, the debugging process and parameter settings
Fourth, the effect of the transformation of the injection molding machine
1, the power saving effect is obvious
The power saving is as high as 20 to 65%, and the equipment is operated for 6-10 months, and the investment can be recovered.
2, pressure stability, precision
The adjustment ability is strong, and the pressure closed-loop control mode makes the system pressure very stable, achieving high-precision precision control. It can be operated according to any pressure and flow curve set by the computer.
3, low noise, weak vibration
Since the servo system is started by vector control, the servo motor runs very smoothly, and there is only a small vibration feeling during operation, and the noise is extremely low, which ensures the reliability of the operation of the equipment. .
4, easy to use
It provides double closed-loop control of pressure and flow, and the computer with dual analog output is connected, which is very convenient for installation and debugging. Ordinary technicians can quickly adjust the parameters through the digital panel, and can also write the adaptation parameters in batches using the digital interface.
5. Reduce the wear level of moving parts such as motor bearings and oil pump blades, and prolong their service life.
6, multiple protection: the motor has overvoltage, undervoltage, overload, overcurrent, lack of equal protection.
