Slip between stator and rotor:

Advantage:
You can tolerate large changes in working temperature. On the contrary, a large temperature change will damage the permanent magnet motor.
输出The output torque of the induction motor can be adjusted over a wide range, so there is no need to install a second or even a third transmission. Tesla designed a motor speed of 12,000 rpm and can generate up to 400 Nm of torque, forcing an increase in output torque during acceleration or climbing (although the time is short), while permanent magnet motor electric vehicles pass through the gearbox. More torque is output to achieve speed increase.
❸ Small size. At present, most electric motors of electric vehicles are still water-cooled, and motors that use water-cooled heat dissipation mean that the motor is larger in size because the water path is too large.
Tesla uses an induction motor to make the size of the watermelon. This has the advantage of faster heat dissipation. Please don't ignore the effect of motor heat dissipation on the motor volume. This design of their heat exchange design brings more space for miniaturization, does not require the installation of radiators, cooling fans, pumps and other heat dissipation mechanisms like other electric vehicles, which also reduces its heat consumption rate.
The small size brings another advantage. Everyone knows the motor power = speed * torque. When the motor is made small, the motor volume can be reduced, the motor speed can be increased, and the low speed (starting) torque can be guaranteed.
❹ Light weight. There is a jargon in the car industry called "Ning a pound, not adding ten." The Tesla motor is similar in size to watermelon and weighs only 52 kg. The speed range can reach 0-12000 rpm, so there is no need to install extra gears. Therefore, the weight of the body has a great advantage.
Disadvantages:
The biggest drawback of induction induction motors in the past is that it is difficult to control the rotational speed of the rotor, but with the development of modern semiconductor control technology, this problem has been solved.
❷ Asynchronous induction motor generates large current required by unit torque due to single-side excitation, and there is reactive current in the stator, so the energy consumption is large and the power factor is delayed.
The disadvantage is that the structure is complex and the induction (asynchronous) motor is used. The control system has high technical requirements and high manufacturing cost. Therefore, Tesla cars are expensive and it is difficult to achieve civilians in a short time.
Small electricity review:
As the inventor of AC power, Tesla has an extraordinary hobby and ability to control AC power, and Tesla Motor is the representative of AC asynchronous motor. Obviously, Tesla will follow the pace of its ancestors.
In the context of the rapid development of modern electronic chips, many problems that have been difficult to overcome in the past have been gradually overcome. Tesla has achieved a very high level of speed control for AC asynchronous motors, but it still has improved in terms of reducing energy consumption and increasing power. space.






