The motor is a key component to power the 3D printer. Because the X, Y and Z axes of the 3D printer work differently, the motor used is also different. If you choose the wrong stepper motor for a 3D printer, it will greatly affect its printing work. So what kind of motor should a 3D printer use?
According to the comparison of stepping motor, choose 42 stepping motor.
1 current, select 1.5A, too low current easy.
2 axis diameter, general 3D printers are driven by the use of synchronous belt, so the need for synchronous wheel, according to this to choose your axis diameter, choose 5mm.
3 heat, the motor heating will be very large and lead to motor shutdown or lost step, better performance can be avoided, especially after the current is large, the heat is greater.
In order to overcome the moment of inertia, it is often necessary to select a motor with a larger torque, and the machine does not need so much torque during normal operation, so the phenomenon of wasted torque appears. Ac servo drive system for closed loop control, driver
The feedback signal of the motor encoder can be sampled directly, and the position ring and speed ring are formed internally. Generally, there will be no step loss or overrush of the stepping motor, and the control performance is more reliable. The control of stepper motor is open-loop control. If the starting frequency is too high or too high, it is easy to lose step or block rotation. If the speed is too high when stopping, it is easy to overshoot. The ac servo system has good acceleration performance and can be used in the control occasions requiring fast start and stop.






