Nov 13, 2018 Leave a message

Precise synchronization is the key

Precise synchronization is the key

The core requirement of the Corizon process is the precise synchronization of approximately 100 conduits from spinning to weaving. Throughout the continuous process, each spinning system must ensure that the output is exactly the same. This is achieved by using multiple mechanical decoupling servo drives whose gear ratios can be freely defined on the HMI. The servo technology must be able to adjust the speed absolutely accurately, as any deviation can cause defects in the final product. “For some time, we have been skeptical about the fact that the texture that affects the quality of our products is related to the technology we use,” Lau said. It was not until the development of new processes and machines that they knew that inadequate control techniques were the culprit.

“With the Cozizon process, we will revolutionize textile production. This technology relies on the precise synchronization of all yarn feeds. POWERLINK communication and B&R drive technology provide us with the required performance.”

Textile machinery often operates in places where power outages occur. In the event of uncontrolled parking, multiple strands of yarn are likely to break and cause material defects. In the worst case, this can mean costly 4 to 5 hours of downtime until all the yarn has been replaced and the machine can resume normal operation. Therefore, no matter what happens, the drive technology must be designed to be safely shut down and started.

Precision comes from the standard

“The team from the B&R Leipzig office identified the cause of the problem and presented a solution at our first meeting,” recalls Lau. “It’s like a fairy tale. Until we received their test equipment, we really believed it – just three weeks later – we saw it with quality.” The automation solution includes the B&R ACOPOS drive system and The EthernetPOWERLINK protocol, both of which support microsecond synchronization as a standard feature. Both hardware and software are standard products, including electromechanical buffer shafts. The 3 kg flywheel on the shaft is driven by a 6000 rpm servo motor. In the event of a power outage, the kinetic energy stored there can generate enough power to allow the machine to achieve controlled parking. The days of yarn breakage caused by power outages are gone.

This drive design allows precise fine-tuning of yarn parameters during operation. These parameters include the amount of warp, the diameter of the Corizon yarn, and the tension of the core yarn. Operators can set them on the operator panel, modify them without interrupting production, or make any mechanical adjustments. This allows the knitting machine operator to perform real-time tests on finished products or to produce unique designs in small batches.


3

Send Inquiry

whatsapp

teams

E-mail

Inquiry