Aug 31, 2022 Leave a message

Operating principle of the compressor

It is mainly used on the air compressor to adjust the start and stop state of the air compressor, and by adjusting the pressure in the gas storage tank to make the air compressor stop and rest, which has the maintenance effect on the machine. During the air compressor factory commissioning, adjust to the specified pressure according to the customer needs, and then set a pressure difference. For example, the compressor starts to start, to pump the gas storage tank, to the pressure of 10kg, the air compressor is stopped or unloaded, when the pressure to 7kg, the air compressor starts to start again, here there is a pressure difference, this process can let the compressor have a rest, to achieve the role of protecting the air compressor.

The DC motor directly drives the compressor, making the crankshaft produce rotation motion, driving the connecting rod to make the piston produce reciprocating motion, causing the cylinder volume change. Due to the change in the cylinder pressure, the intake valve makes the air through the air filter (muffler) into the cylinder. In the compression stroke, the compressed air through the action of the exhaust valve, the exhaust pipe, check valve (check valve) into the gas tank, when the exhaust pressure reaches 0.7MPa. The pressure switch automatically starts when the reservoir pressure drops to 0.5--0.6MPa.

For different temperature measurement ranges, the temperature switch of different structure should be selected, within 0℃ to 100℃, usually using solid expansion temperature switch, in 100℃ to 250℃, mostly using gas expansion temperature switch, above 250℃, only thermocouple or thermoresistance thermometer can be used, after the measured transmitter into analog electrical signal, and then the electrical signal into switch quantity signal.TW-DC977S

Send Inquiry

whatsapp

teams

E-mail

Inquiry