Motor noise and noise reduction measures
Controlling noise is an important part of environmental protection, and motor noise is an important technical indicator to measure the quality of motor products. Therefore, controlling the noise of the motor has become an important issue for the survival and development of motor manufacturers at home and abroad. The article analyzes and discusses the main causes of noise and the noise reduction measures taken.
When the motor is running, there are usually a variety of noise sources coexisting at the same time. Different noises are generated by various parts of the motor, and the different parts of the motor forming noise are generally uncorrelated, so they can be separately studied and take special noise reduction measures. .
1, electromagnetic noise
Electromagnetic noise is mainly caused by changes in time and space, and is caused by the magnetic pulling force acting between the various parts of the motor. The magnetic field in the air gap space is a rotating force wave whose radial force wave causes radial deformation and periodic vibration of the stator and the rotor, and is a sound source for forming noise. Most of its sound waves are radiated by the stator and other components to the surrounding space, becoming "airborne noise", and most of the electromagnetic noise is "airborne noise." There are many reasons for design and failure, which also cause an increase in electromagnetic noise, such as: magnetic tension unbalance; influence of core saturation; effect of open slots; noise generated by flux oscillation; dynamic eccentricity of air gap; pulsation in thyristor power supply Component; harmonic component in the power grid; asynchronous motor broken strip; DC motor armature and main pole turn-to-turn short circuit; AC motor core pressing is not tight; assembly air gap is uneven. Therefore, properly reduce the air gap flux density of the motor and increase the air gap. If the armature chute is used in design, the uneven air gap of the DC motor and the magnetic wedge of the AC motor are all to reduce the harmonic and electromagnetic noise of the tooth. Effective measures. Increasing the rigidity of the frame can reduce the vibration and noise generated by the fundamental wave rotation force in the stator and rotor air gap fields. Improving the uniformity of the air gap assembly and the stacking quality of the core are all beneficial to reduce electromagnetic noise.





