Motor gearbox is widely used in wind turbine generator set. It is often used in wind turbine generator set and is an important mechanical part. The main function of gearbox is to transfer the power generated by wind turbine to generator and make it get the corresponding speed.Usually the speed of the wind turbine is very low, far less than the required speed of the generator generation, must be achieved through the gear box gear pair to increase, so the gear box is called the increase box.
Secondly, the gear box has the following functions:
1, acceleration and deceleration, is often said that the change gear box.
2. Change the transmission direction, for example, we can use two sector gears to transfer the force vertically to the other axis of rotation.
3. Change the torque.Under the same power condition, the faster the gear rotates, the smaller the shaft torque, and vice versa.
4. Clutch function: We can separate the engine from the load by separating the two originally engaged gears.Such as brake clutch and so on.
5. Allocate motivation.For example, we can use an engine to drive multiple slave shafts through gearbox spindles, thus realizing the function of one engine driving multiple loads.
