Household grinding machine can be used to grind all kinds of ingredients and seasonings into powder, very convenient, its use method is also very simple, the grinding machine clean, put on a stable table, open the top cover, into the dry material, then plug in the power, open the timing switch to set the time, wait until the material is crushed, take out the grinding cup and pour out the ingredients on the line. When using the mill, we should pay attention to some matters, such as power supply to ground wire, avoid adding oily or wet materials, input materials should not exceed 1/2 capacity, etc.
First, the use of household grinding machine
In order to facilitate the grinding of grains and condiments, many families will buy a grinding machine, which is convenient to use and can save time. The use method of household grinding machine is also very simple:
1. Before use, clean the crushing cup and lid according to the cleaning and maintenance instructions, and put the grinding machine in a flat, clean and dry place for use.
2. Turn off the power, open the top cover, put the dry material into the grinding cup of the mill, and close the top cover tightly.
3. Plug in the power supply, turn on the timing switch, set the time according to different material hardness, or refer to the guide of crushed ingredients.
4, when the rolling sound is more uniform, it indicates that the material has been ground into powder, shut down.
5. Do not open the lid immediately after the shutdown, wait a few seconds, wait for the tool to stop rotating, take out the crushing cup, then open the lid and pour out the crushed ingredients, clean the corner of the crushing cup with a brush.
Second, what matters should be paid attention to when using a small grinding machine
There are blades in the household grinding machine, and it is also an electrical appliance with large power. It is necessary to pay attention to safety when using. The precautions for using small grinding machine are:
1. The power supply should be close to the work surface and must be grounded. Do not pull the power cord forcefully to prevent others from tripping.
2. When grinding, the mill should be placed on a smooth table, and other irrelevant items should be avoided on the table.
3, household grinding machine is usually dry powder grinding processing, should avoid oil, water quality in the machine, if it is wet material, should try to dry or dry before putting into the grinding.
4. Pay attention to the use of grinding machine, a need to crush the pulverized material input can not exceed half of the capacity of the crushing tank, so as not to have enough space for the object to be fully crushed.
5. If the material to be ground is wet, it may jam the blade and cause the grinding machine to not rotate. At this time, there will be a buzzing noise.
6. Household crusher can not work continuously for a long time. If the number of work is large, it needs to be suspended for a few minutes, until the fuselage is slightly cooled before continuing to use, otherwise it may lead to overheating of the bearing and damage the motor.
7. After using the household mill for a long time, it is necessary to check the mill regularly to see whether the carbon brush and blade have serious damage. If there is damage, it needs to be replaced in time.
8. If the motor does not rotate in use, it must be timely cut off the power supply, check whether the plug of the power cord is in good contact, whether the fuse is broken and whether the carbon brush is seriously worn, and then replace the spare fuse and carbon brush.
9. During use, it is strictly prohibited to open the cover of the case directly after starting up.
10, do not use water to directly clean the grinding groove of the household mill.
