Electric curtain is the way of wireless curtain control by motor drive. From the installation can be divided into built-in type and external type. According to the different operating mechanism and decorative effect, the electric curtain is divided into electric opening and closing curtain series, electric lifting curtain series, electric canopy curtain (outdoor electric canopy and indoor electric canopy), electric sunshade, electric sunshade and other series, such as shutter, rolling curtain, Roman curtain, soft gauze curtain, organ curtain, honeycomb curtain, etc.
Electric curtain, different from the tradition, is: the ring slip line and the hanging ring are no longer bound as one, but through the belt connection. The specific structure is: belt drive, in the closed curtain rod inner cavity operation, belt traction curtain and then traction hanging ring. This new type of electric curtain belt is not exposed, will not cover dust and winding, can be compatible with electric hands, do shower curtain is also very appropriate.1. An electric curtain, composed of motor, deceleration wheel group, active wheel, pulley and belt. It is characterized by: super quiet, slow start and slow stop, operation in the inner cavity of the rod, and the hanging ring is all set in the periphery of the curtain rod or embedded into the lower opening seam.
The electric curtain machine consists of three parts:
1. Intelligent controller system that controls the curtain opening and closing.
2. Operate and set the unless controller for the main controller.[Electric curtain]
3. The actuator of the pull curtain- -the motor and the pull mechanism. The main engine controls the forward and backward rotation of the motor, and automatically closes or opens the curtain by pulling the pulley.
Can also make the infrared remote control can directly remote control the opening and closing of the curtain, with the remote control to set the automatic function of the main controller, once set and open the automatic control function, the main controller will automatically complete the control according to the setting function.
The main controller is a key part of the control system.
