The principle of natural gas heating oven is to heat the air and food inside the oven after the heating tube is energized, so the oven can and needs empty box preheating to reach the required temperature. While the old model used quartz tubes, the new ones all use copper tubes. Usually in the oven up and down each two copper tube, the volume of the oven is particularly large W tube, increase the length of the heating tube, improve heating efficiency. The heating tube has only one power, and when the oven reaches the desired temperature, the heating tube will be cut off, and when the oven cools down, the heating tube will be energized and reheated, so on and so on to ensure the temperature in the oven is constant. So the power of the oven refers to the power when it is heated, but it is not heated all the time during the whole baking process.
Industrial oven, hot air circulation system consists of air supply motor, wind turbines and electric heaters, under the action of supply air fan with air inlet air cooling) (that is, the outside air, the wind road system into the supply air fan, air blower and the cold air by the wind turbines, volute, uniform air supply to the heater warming in the wind system, is the hot air. The hot air enters into the box body of the industrial oven through the air path system, and then forms various air paths. The air is supplied to each corner horizontally or vertically, so that the temperature of each position point reaches the same, and then the alternating cycle of hot air is continuously carried out in the industrial oven to heat and solidify the object.
Basic Principles:
1. The hot air circulation system of the oven is composed of an air supply motor, a wind wheel and an electric heater. The air supply motor drives the wind wheel to send out cold air.
2. Hot air circulation system is conducive to improving the uniformity of air temperature. In the process of the oven opening and closing box door transporting materials, the temperature value will be affected and changed. The uniformity of the hot air circulation system is conducive to the temperature value of the working state in the maximum speed.





