Aug 11, 2022 Leave a message

How a grinder works

A grinder is a grinder that grinds the workpiece surface with a grinding tool coated or embedded with abrasive. It is mainly used for grinding high precision plane, inner and outer cylindrical surface, conical surface, spherical surface, screw surface and other surface of the workpiece. The main types of grinder are disc grinder, rotary shaft grinder and various special grinder.

Single surface grinding machine working principle: grinding, throwing materials on the grinding disc, grinding disc rotation clock, correction wheel drive workpiece rotation, gravity pressure on the workpiece, workpiece and grinding disc for relative operation friction, to achieve the purpose of grinding and polishing. The grinding disc dressing mechanism uses oil pressure suspension guide to reciprocate back and forth, and the diamond trimming knife trims the grinding surface of the grinding disc precisely to get the ideal plane effect.

The working principle of the double-sided grinding machine: the upper and lower grinding discs rotate in opposite directions, and the workpiece moves in the carrier both rotating and rotating. The grinding resistance is small and does not damage the workpiece, and the production efficiency is high. With grating thickness control system, thickness tolerance of processed products can be controlled. The device of double-sided grinding machine includes two grinding discs, cruise ship, four motors, sun wheel, shaving machine and so on. In comparison, the structure of double-sided grinding machine is relatively complex, but if the workpiece needs double-sided grinding machine for grinding than single-sided machine efficiency is almost twice as fast. The birth and development of this double-sided grinding machine has improved the production efficiency of many industries. More used in the optical glass industry silicon wafer, sapphire substrate, epitaxial sheet and so on.

Soil grinder is a machine used to crush soil, sand and stone. It is driven by the motor spindle rotation, so that the cutter head in the shell high-speed rotation at the same time, the blade installed on the cutter head (or hammer) impact on the material to achieve cutting and crushing.

Its working principle is as follows: the motor drives the spindle to rotate through the coupling, and then drives the two eccentric sleeves to rotate after a pair of bevel gears decelerate; One end of the eccentric sleeve is meshed with the transmission gear, and the other end is relatively fixed with the active hammer head fixed on the shell; Active hammer around the pin for circular movement, due to the effect of centrifugal force and the hammer head part of the material is impacted and broken; At the same time, the crushed material flies out along the tangent direction and forms a continuous particle slurry flow into the screen hole to discharge.

0

Send Inquiry

whatsapp

teams

E-mail

Inquiry