High efficiency, energy saving and consumption reduction control of motor frequency conversion speed regulation
The frequency conversion speed regulation of the motor has gradually become a symbol of the times. The synchronous motor running speed regulation is the frequency conversion speed control of the square motor torque load driven fan and pump type square torque load machine in the production process. The frequency conversion speed control can obtain the best process effect and considerable energy saving and consumption reduction effect.
energy saving effect
The mechanical equipment driven by the traditional brushless excitation synchronous motor, such as fan, pump, and compressor load, is constant at the power frequency. When the process adjusts its flow and pressure, it will cause serious energy waste. Because the load changes its flow rate is proportional to the speed, and the required power is proportional to the cube of the speed. Therefore, if the required flow rate is 80% of the rated flow rate, in this realistic situation, the use of modern variable frequency speed control automatic control can save more than 45% of the electrical energy than the traditional adjustment method.
Frequency conversion process control
The frequency conversion speed regulation operation is a single machine control system. The frequency conversion speed regulation operation process is basically the same but different from the frequency conversion speed regulation soft start process. The difference is that after the synchronous control motor frequency conversion speed control operation preparation command is issued in the total control room, the synchronous motor The electric drive motor drives the motor to rotate and rotate. When the synchronous motor rotates at a speed of 1% of the rated speed, the synchronous motor according to the designed procedure, the command control system sends a "permitted investment" after the excitation control is excited. ", that is, the soft start high voltage switch signal indication of the frequency conversion speed control operation. At the same time, according to the signal indication, the general control room immediately closes the high-voltage switch of the main control circuit of the soft-start control system of the synchronous motor frequency conversion speed control, so that the synchronous motor is in the soft start state of the variable frequency speed control.
In the process of variable frequency FM soft start control of the synchronous motor, the polarity of the rotor magnetic pole of the synchronous motor does not change, and the rotation speed is accelerated with the frequency of the frequency conversion speed regulation, and the synchronous output speed is gradually increased, so that the synchronous motor runs at the rated speed, and the completion is completed. Variable frequency speed control soft start control.
In the process of variable frequency speed regulation, the synchronous motor is controlled by the variable frequency speed control system, the micro industrial control computer control system, and the stable and precise speed control of the vector operation control according to the actual load change.
Before the stop of the variable frequency speed control operation of the synchronous motor, the variable frequency speed control operation device must automatically reduce the output current to zero, and block the trigger pulse of the variable frequency speed control operation device before the “permitted stop” signal display can be given. The total control is based on the display signal command, and immediately turns off the high-voltage switching power frequency power supply of the main control loop of the variable frequency speed control operation control device, and ends the frequency conversion speed control operation control process.






