Jun 03, 2021 Leave a message

Customized motor mech

Customized motor machinery and improved power factor can reduce mechanical loss. 95% of the rotary drive equipment in power plants is AC asynchronous motors, and AC asynchronous motors are devices with low power factor. If we improve its power factor, we will discuss it.

Reasonably adjust the operating equipment and improve the power factor. Before manual compensation, the existing equipment of the power plant should be inspected and adjusted to make it operate reasonably, thereby improving the power factor.

(1) Generally speaking, the equipment in the power plant is matched without us considering the capacity and type selection. Only the running motor should be considered to avoid the phenomenon of "big horse-drawn trolley". When the load rate is lower than 40%, Consider replacing a small-capacity motor. When the load rate is lower than 30%, the winding of the delta connection can be changed to the operation mode of the star connection, so that the efficiency and power factor of the motor are improved.

(2) The old series of motors, such as J0 and J02 series of old motors, should be transformed or eliminated, and the Y series of energy-saving motors should be replaced.

(3) Correct use and maintenance of the motor, pay attention to controlling its frequent startup (the power factor is very low during frequent startup), careful maintenance, and adjustment of the center line and motor rotation and stator gap during the installation of the motor are also indispensable, because the air Uneven gaps will increase the no-load current and decrease the power factor.

1

Send Inquiry

whatsapp

teams

E-mail

Inquiry