Straw breaking machine, an agricultural cutting machine, can cut crop stalks into fragments, thus better serving as a feed processing machinery, mainly for agriculture and animal husbandry. Feed processing machinery that cuts the harvested crop stalks or green forage crops into broken segments. There are mainly hay cutter and green forage cutter. The structure of the two is basically the same, which is composed of feeding chain, pressing grass roller, up and down feeding roller, cutting device and so on.
During the operation, the material is pressed by the feeding chain through the pressing roller and the upper and lower feeding roller, sent to the crushing device and cut into broken segments, and then through the throwing blade thrown outside the machine. There are hob and disc b. The movement track of the cutting blade mouth is a drum, the feed is fed radially, and the feed is cut into broken segments under the action of the cutter and the cutter. Its compact structure, easy to use adjustment, motor power consumption is less, more used in small hay cutter. In order to make the feed not slip when cutting, the clamp Angle (push Angle) between the cutter and the cutter is generally 40°~50°, and there are two kinds of spiral blade mouth and straight blade mouth.
The spiral wire blade mouth cutting knife has good clamp performance, high cutting quality, and the cutting resistance moment is more uniform, but the manufacturing process is complex, and the grinding blade is difficult. Straight blade roll knife strength, easy to manufacture, easy grinding, common use. The track of the cutter blade is circular, and the feed is fed from the axial direction. The universal motor drives the knife to turn the chopped feed at 350-350-750 RPM, and can throw the feed fragments directly. Therefore, the series motor power consumption is large, mostly used in large and medium-sized hay cutter and forage cutter. Disc knife has straight blade, convex blade and concave blade 3. The cutting resistance moment of the straight blade mouth disc knife changes greatly, but with high strength and easy grinding blade. Bulge blade edge mouth cutting knife is mostly eccentric round type, its cutting resistance moment is more uniform, but because of the clamp Angle near the cutting end is too large, and produce partial grinding phenomenon. The concave blade has smaller Angle and good cutting quality, but the blade is difficult. The green cutter used for making silage is commonly used with a plate cutter with leaf throwing plate, which can feed fragments directly into the silage tower or silage or silage trench. If a hob crusher is used, another blower should be installed to throw the green forage fragment section into the silage building.





