One of the manufacturers of China's DC speed reducer, in order to malfunction, we must first understand which techniques for the slower motor.
First, the user should have a reasonable use maintenance rule system, and the problems found in the operation of the speed reducer should be carefully recorded. When the oil temperature is found to be more than 80 ° C or the oil pool temperature exceeds 100 ° C and does not produce When normal noise, the use should be stopped, check the reason, must exclude the fault, after replacing the lubricant, can continue to operate.
Second, when changing the oil, wait for the gearization motor to cool down without combustion risk, but should still be warm, because after cooling, the viscosity of the oil increases, the oil is difficult. Note: To cut off the power supply to prevent unintentional power.
Third, after running 200 ~ 300 hours, the oil should be changed, and the quality of the oil should be submitted regularly in the future use, and the oil must be replaced in time to mix the impurities or deterioration. In general, the slowder motor for long-term continuous work According to the running 5000 hours or replace the new oil once a year, the long-term deceleration motor should also replace the new oil before re-running. The speed of the retro motor should be added to the original grade, and may not mix with different grades of oil. Oil having different viscosity differential allows for use.
Related recommendation
