China 24v gear motor suppliers tells you the seven detailed steps to properly disassemble the DC geared motor.
DC geared motors have the advantages of high precision, small size, durability, low energy consumption, etc. They are commonly used in office equipment, electronic locks, remote control toys, precision instrumentation windows, etc., and the scope of application is very wide. In different situations, the DC geared motor also needs to be disassembled and inspected. At this time, it is necessary to disassemble according to reasonable methods and steps. Then, China 24v gear motor suppliers will explain the seven detailed steps of properly disassembling the DC geared motor.
1. Remove all external cables from the motor.
2. Remove the end cap screws and bearing caps on the commutator end and remove the bearing cover.
3. Open the ventilation window of the end cover, remove the brush from the brush holder, and then remove the connecting line on the brush rod.
4. Remove the end cover of the commutator end and take out the brush holder. If the motor with the brush is removed, the brush should be taken out of the brush holder. For the DC motor, the position of the brush neutral line should be marked.
5. Wrap the commutator with thick paper or cloth to keep it clean and prevent bruises.
6. Remove the end cap screws at the end of the shaft and take the armature out of the stator.
7. Remove the bearing cap screws at the end of the shaft and remove the bearing cover and end cap bearings. If the bearing is not damaged, it is not necessary to disassemble.
