Jul 17, 2019 Leave a message

Brush DC motor factory tells you Two precautions for refueling 24V DC motor

Brush DC motor factory tells you Two precautions for refueling 24V DC motor

The 24V DC motor needs to be refueled, and there are strict control methods for refueling. There is a quantity, not too much or too little. Because the 24V DC motor is determined according to actual needs, for example, the refueling of the small motor is not the same, and it does not affect the other vehicles, no matter how much. Here are two notes on 2V DC motor refueling:

1, the method of refueling

There are usually two ways to ensure the number of 24V DC motor refueling. Here is only a simple and accurate method. Place the 24V DC motor horizontally and turn the drum body so that the oil drain on the end cap is at 1/3 of the diameter of the drum. At this time, the oil is injected from the oil filling hole until the oil draining hole overflows. At this time, the liquid level in the drum body should be 1/3 of the diameter of the drum.

2, 24V DC motor refueling

The refueling amount of the 24V DC motor is determined according to actual needs. It is concluded that the amount of cooling oil is equal to 1/3 of the diameter of the drum, based on the calculation statistics of 24V DC motors of various varieties and specifications. This amount of oil basically satisfies the cooling of the 24V DC motor motor. Generally, the motor has a volume of 1/4-1/5 immersed in the oil. The lower edge of the transmission gear can be in the oil. After the drum rotates, it can meet the needs of cooling and lubrication.

TW-775SPF

Send Inquiry

whatsapp

teams

E-mail

Inquiry