Electric tools motor is mostly series excitation motor, internal brush motor has the characteristics of small volume, large power, high speed. But not for long hours.
Motor speed regulation of power tools is mostly the same motor speed, through the output of mechanical deceleration mechanism to speed regulation. The speed regulating motor is made up of a tapered driving wheel and a pressure plate pressed by a group of disk-shaped springs. The input shaft and the driving wheel are connected by keys to form a pressing active device.
A group of planetary friction wheel with taper inside clamping between the active wheel and the pressure plate, the lateral clamping between the fixed degree ring with taper and speed regulation CAM, near and formed a friction pair;
When the pressing active device is running, the friction wheel will do pure rolling, because the fixed ring and speed CAM do not move, therefore, the friction wheel in rotation at the same time for revolution, through the central axis of the planetary friction wheel and sliding block bearing and drive the planetary frame rotation.
At the same time, the hand wheel drives the speed regulating CAM to change the Angle to the position, the end curve of the speed regulating CAM is known by the plane pin clamp and the fixed CAM end curve function, so that the speed regulating CAM produces axial movement, so as to evenly change the interval between the speed regulating CAM and the fixed ring, so that the taper planet friction wheel produces radial movement.






