Feb 24, 2020 Leave a message

The Method To Solve The Noise Of Customized Rc Brushless Motor

The method to solve the noise of Customized rc brushless motor

The so-called DC brushless motor noise solution is to comprehensively consider the operation of the equipment. Specifically, there are the following aspects for your reference.

1. Vibration reduction and blocking measures during the installation of the reducer, the resonance between the body and the foundation support and connecting parts shall be avoided as much as possible to generate noise. The resonance of one or several gears in the energy-saving reducer of DC brushless motor often occurs in some speed range.

In addition to the design reasons, it is directly related to finding out the resonance position without air test during installation and taking corresponding damping or blocking measures. For some reducers requiring low transmission noise and vibration, high toughness and high damping foundation materials should be selected to reduce the occurrence of noise and vibration.

2. The loose parts of the energy-saving decelerating motor of the motor are due to the loose parts (such as the bearing pre tightening mechanism, shaft positioning mechanism, etc.) during the installation, resulting in inaccurate system positioning, abnormal position engagement, shaft movement, vibration and noise. This series needs to start from the design structure, try to ensure the stability of the connection of each mechanism, and adopt a variety of connection methods.

3. When the transmission parts are damaged during installation, the transmission parts are damaged due to improper operation, resulting in inaccurate or unstable movement of the system; the high-speed moving parts cause oil film vibration due to damage; the human caused dynamic imbalance of the moving parts; all of them produce vibration and noise.

In the above introduction, what we should know is that during the installation process of DC BLDCM, we must pay attention to and avoid as much as possible. The damaged parts that cannot be repaired must be replaced to ensure that the system can obtain stable noise level.

TW-BL2615

Send Inquiry

whatsapp

teams

E-mail

Inquiry