The suction fan / Suction pump / Suction Fan Motor can be mounted at any angle and is firmly screwed to the horizontal position with a rigid base or base. Base weight is about 3 times higher than the high-pressure Fan for the standard! . Special attention should be paid to whether the base is uneven. If so, when the bolts are tightened, the high-pressure Fan table may be deformed. ! ADD shock absorbers to reduce noise . When the intake is not connected to the ventilation duct, please install barbed wire or filter to prevent the inhalation of dangerous or foreign matter .
When using the suction fan / Suction pump / Suction Fan Motor, pay attention to the characteristics of the conveying medium and the observation of the high-pressure fan itself . The temperature of the conveying medium of the high-pressure Fan shall not exceed 40 °C, and the size of the medium particle Zui shall not exceed half of the small working clearance of Zui. The use of high-pressure fan pressure shall not be higher than the nameplate on the boost range, in order to ensure that its operation in Zui in good condition.
