Six measures to prevent the cheap 110v dc motor governor from burning off
When the DC motor governor is installed, connected, or commissioned, it cannot be installed, removed, or replaced under power conditions, and may be easily burned. For how to prevent the DC motor governor from burning, Shenzhen Longhui Motor summarized the following six measures to prevent burning:
1. When the professional technicians of the DC motor governor are installing, connecting and debugging, the equipment wiring cannot be installed, removed or replaced under the condition of electrification.
2. Be sure to install necessary protection devices between the power input terminal of the DC motor and the power supply (battery) to avoid dangerous accidents or fatal injuries; need to install: overcurrent protector, insurance, emergency switch.
3. Do a good job of isolation and insulation protection from the earth and equipment.
4. If you really need to be powered, use a non-metallic special screwdriver or special debugging tool with good insulation.
5, need to be installed in a well-ventilated environment.
6, can not be directly applied to high humidity, dust, corrosive gases, strong vibrations in an abnormal environment.
