Jan 19, 2019 Leave a message

Permanent Magnet Synchronous Motor Uses Permanent Magnet Excitation, Which Has The Unparalleled Advantages Of Electric Excitation Motor.

Hot spot

Permanent magnet synchronous motor uses permanent magnet excitation, which has the unparalleled advantages of electric excitation motor.

1) High efficiency: After embedding permanent magnet material on the rotor, the rotor and the stator magnetic field run synchronously during normal operation, the rotor winding has no induced current, and there is no rotor resistance and hysteresis loss, which improves the efficiency of the motor.

2) High power factor: no induction current is excited in the rotor of the permanent magnet synchronous motor, the stator winding exhibits a resistive load, and the power factor of the motor is close to 1, which reduces the stator current and improves the efficiency of the motor. At the same time, the power factor is improved, the quality factor of the power grid is improved, the loss of the power transmission and transformation line is reduced, and the power transmission and transformation capacity can also be reduced, thereby saving power grid investment.

3) Large starting torque: In equipment that requires large starting torque (such as oil field pumping motor), a larger capacity permanent magnet motor can be used instead of a larger capacity Y series motor. If the 37kw permanent magnet synchronous motor replaces the 45kW to 55kW Y series motor, the phenomenon of “big horse trolley” is better solved, the equipment input cost is saved, and the operating efficiency of the system is improved.

4) Good energy index: When the Y series motor works under 60% load, the efficiency is reduced by 15%, the power factor is reduced by 30%, and the force index is reduced by 40%; while the efficiency and power factor of the permanent magnet synchronous motor are slightly reduced. When the motor has only 20% load, its force index is still more than 80% of full load.

5) Low temperature rise: There is no resistance loss in the rotor winding, and there is almost no reactive current in the stator winding, so the motor temperature rise is low.

6) Small size, light weight and low consumables: The volume, weight and materials used for permanent magnet synchronous motors of the same capacity can be reduced by about 30%.

7) The air gap can be formed to facilitate the formation of a new magnetic circuit.

8) The armature has a small reaction and is highly resistant to overload.

2

Send Inquiry

whatsapp

teams

E-mail

Inquiry