Jan 05, 2019 Leave a message

How To Turn The Brushless DC Permanent Magnet Motor?

How to turn the brushless DC permanent magnet motor?

Taking the "three-phase star-bridge connection" commutation circuit shown in Figure 1 as an example, take a look at the electronic commutation process of "two-phase conduction star three-phase six-state":

In the first step, when the time electrical angle t=0°, the power switching transistors BG1 and BG5 are turned on, that is, from the positive end of the power source→BG1→U→V→BG5→the negative end of the power supply;

In the second step, when the time electrical angle t=60°, the power switching transistors BG1 and BG6 are turned on, that is, from the positive end of the power source→BG1→U→W→BG6→the negative end of the power supply;

In the third step, when the time electrical angle t=120°, the power switching transistors BG2 and BG6 are turned on, that is, from the positive end of the power source→BG2→V→W→BG6→the negative end of the power supply;

In the fourth step, when the time electrical angle t=180°, the power switching transistors BG2 and BG4 are turned on, that is, from the positive end of the power source→BG2→V→U→BG4→the negative end of the power supply;

In the fifth step, when the time electrical angle t=240°, the power switching transistors BG3 and BG4 are turned on, that is, from the positive end of the power source→BG3→W→U→BG4→the negative end of the power supply;

In the sixth step, when the time electrical angle t=300°, the power switching transistors BG3 and BG5 are turned on, that is, from the positive end of the power source→BG3→W→V→BG5→the negative end of the power supply;

In the seventh step, when the time electrical angle t=360°, the state of the time electrical angle t=0° is repeated, so that the cycle is repeated, and the voltage of the coil with the two-phase winding under the corresponding magnetic pole is always loaded with a fixed polarity voltage. The current flowing in a fixed direction generates a torque in a fixed direction, causing the motor to drive the load to rotate.

It can be seen that the polarity of the current applied to the motor does not change, and there is no mechanical commutator or permanent magnet excitation, so it is called a brushless DC permanent magnet motor.

2

Send Inquiry

whatsapp

teams

E-mail

Inquiry