Gear motor is generally used for low speed and high torque transmission equipment, is the motor or other high-speed operation of the transmission equipment through the reducer transmission to the output shaft of the gear to achieve the purpose of deceleration.
The performance of the first gear motor is as follows:
1. The minimum diameter can be 3.4mm in volume.
2. High transmission rate: single stage greater than 96.5%, double stage greater than 93%, and three stage greater than 90%.
3. Smooth operation and low noise.
4, light weight, long service life, high bearing capacity.
5. Customized parameters and power, wide application range.
Second, matters needing attention in installation and maintenance are as follows:
1. Before use, please confirm whether the appearance of the deceleration motor is damaged and whether there is oil leakage.
2. Please first confirm the operating voltage of the deceleration motor.Voltage regulators can be installed when the voltage is not stable.
3. Please first confirm whether the specification of the purchased decelerating motor is consistent with the design specification.
4. Please confirm to fix the frame to avoid loosening during transmission.
5. If sprocket, pulley, coupling and other accessories are used, they shall be installed in accordance with relevant regulations.
6, the motor body has been put into the lubricating butter, 12,000 hours without changing the lubricating oil.
