discount 24v Gear Motor working principle
The working principle of the DC geared motor is also the same as that of the ordinary small DC motor. For the other-type DC geared motor, if the field winding is energized by the excitation current, a constant magnetic field is established. When the armature winding passes the current, an electromagnetic torque is generated to rotate the rotor, and one of the field winding or the armature winding is powered off. The motor stops immediately. By changing the magnitude and direction of the excitation current, the speed and steering of the motor can be changed to meet the control requirements of the geared motor. When the load torque is constant, the armature power supply voltage is kept constant. The rotation speed of the motor is controlled by changing the excitation current. This is called magnetic field control. Keeping the excitation current constant, the motor speed is controlled by changing the power supply voltage. Since the characteristics and accuracy of the latter are ideal, the DC geared motor generally adopts armature control, that is, the armature voltage is used as the control signal voltage, and the magnetic field control mode is only used for the low power motor.
The basic working principle of the discount 24v Gear Motor is the same as that of a general DC motor. When the field winding is connected to a constant voltage, when the armature winding receiving the control signal receives the control voltage signal, a current flows through the armature winding, and the magnetic flux generated by the armature winding interacts with the magnetic flux generated by the field winding to generate electromagnetic torque, so that the armature Rotate. By changing the size of the control voltage signal, the speed of the motor can be changed to achieve the purpose of speed regulation.
The following items should be noted when using the DC gear motor:
1 When the electromagnetic armature controlled DC gear motor is used, the excitation power must be turned on first, and then the armature voltage is applied. In the operation, the excitation winding should be avoided as much as possible to avoid excessive armature current and overspeed of the motor.
2 When using different forms of armature to control the power supply, be careful that the capacity should be left with an appropriate margin.






