Jul 16, 2020 Leave a message

Customized Reduction Gearbox

How to customize the gearbox and choose the matching motor according to the working machine? The principle is actually very simple: the motor and gearbox can be used in conjunction with the transmission through the gear train.

First of all, the appropriate power supply should be selected according to the working voltage of the motor, and then the required transmission ratio can be obtained according to the speed required by the motor and the speed of the motor, and then the transmission ratio of the gear train can be determined according to the transmission ratio provided by the existing gearbox.

Finally, determine the ratio of gear teeth according to this transmission ratio, and then select the appropriate gear radius and gear material through mechanical analysis. Finally, the gears are processed and can be used after assembly and debugging. Specific steps:

1. Calculate the required torque and speed according to the parameters of the working machine, and calculate an approximate power.

2. Check the rated torque of the motor according to power. When the maximum torque of the motor is 1450 rpm.

3. According to the required torque / rated torque of the motor, it is the reduction ratio of the reducer. At this time, it has not been finally selected, and it is checked whether the rotation speed according to this reduction ratio meets the needs. If it is greater than the required speed, it meets the requirements; if the speed is too small, the required reduction ratio is calculated according to the speed.

4. There are many types of reducers, select the type according to your needs.

5. Pay attention to protect the reducer. When selecting the reducer, there is a power behind the parameter speed and transmission ratio, which is the maximum power allowed by the reducer. It cannot be exceeded, otherwise it may cause overload damage to the reducer.

TW-GMP45RP775

Send Inquiry

whatsapp

teams

E-mail

Inquiry