China Induction motors factory Tell you about the induction machine.
The speed and torque characteristics of these motors vary. The constant rotor torque(starting torque) refers to the minimum torque, which is generated when the rotor stops, which is rated voltage and frequency. The limit torque is the maximum torque, which occurs before the sudden motor speed decreases, with a rated speed(rated voltage and frequency). The pull up torque is the minimum torque, which occurs when the speed of the motor is from the stop to the speed point, and the limit torque occurs.
The European and global motor markets have different motor types and specifications and are defined by IEC. One of the IEC induction motor types, called the N type, is comparable to NEMA's A and B types.
Speed control method
The speed of the induction motor can be changed by the following two methods:
1 Change the end voltage of the stator.
2 Change the frequency of the stator. The output torque of the new energy motor can vary with the voltage of the stator end. Note that the change in voltage does not change the speed difference corresponding to the maximum torque of the motor.






