High quality China big motor factory, provide after - sales maintenance ,We usually use lubricating oil in the operation of large motors. So what should we pay attention to in the process of use?
1. Pay close attention to the change of oil temperature. Oil level should be maintained at 2/3 of the oil window.
2. Replace the lubricating oil in strict accordance with the requirements of the brand or appearance drawing.
3. Do not plug the air pressure balance holes on both sides of the respirator and the lower end of the end cover, otherwise the lubricating oil will be sucked into the motor.
4. If the bearing lubricating oil is cooled by water, the interface size and the specific requirements of cooling water shall be strictly in accordance with the motor outline drawing.
5. The inner and outer ring of the rolling bearing should not be loosened under normal circumstances. If the outer ring is found, it should be repaired in time.
6. It is often necessary to check the sealing ring and cover for damage and aging. If so, please replace them in time.
7. When preparing to use the motor that has been idle for a long time, the rolling bearing must be cleaned with gasoline.
8. When using and maintaining the motor, pay attention to the information provided on the bearing nameplate.






