Provide cheap motor gear, motor gear is very wide range of applications, so how should maintenance and inspection?
I. For reducer with oil level plug: check oil level, whether it is qualified;Install oil level plug.
2. Oil replacement: After cooling, the viscosity of oil increases and it is difficult to drain oil, so the reducer should be changed at the operating temperature.Cut off the power to prevent electric shock!Wait until the reducer cools and there is no danger of burning!
3. Matters needing attention: Inject new oil of the same brand;The oil quantity should be consistent with the installation position;Check the oil level at the oil level plug;Tighten the oil level screw plug and ventilator;The reducer should be kept warm when changing oil;
Place an oil pan under the oil drain plug;Open oil level plug, ventilator and drain plug;Remove all oil;Install oil drain plug.
4.Check oil level: cut off the power supply to prevent electric shock!Wait for the reducer to cool down;Remove oil level plug to check if oil is full;Install oil level plug.
5. Oil inspection: Cut off the power supply to prevent electric shock!Wait for the reducer to cool down;Open oil screw plug to take oil sample;Check the viscosity index of oil;If the oil is obviously turbid, it is recommended to replace it as soon as possible.






