3D printer motor resonance and motor out of step solution motor resonance is: the printer in I make noise. There are two reasons :(1) resonance. (2): Great resistance. Solutions :(1) the mechanical matching parts are not in place due to resonance (the manufacturer's quality problem is suggested to return to the factory)(2) in the case of power failure, we manually move the printing head around and around. If we feel obvious resistance when moving to a place, we can mark the position with a marker. Then check whether the slip is worn or twisted, and contact the manufacturer for replacement or return to the manufacturer for repair. (It is suggested that if mechanical resistance is large, try not to repair by yourself, which may delay the delivery or maintenance period.) Out-of-step refers to the dislocation and deviation in the process of printing the model. Appear this kind of circumstance has four kinds: a small, motor current b, motor synchronous Fei wheel bolt looseness big d c, mechanical resistance, mechanical structure is not vertical, diagonal error) solution: a: small motor current we can through the configuration file modified b: motor synchronous belt wheel bolt looseness is very good solve our first hand pull the print head moving around, If either axis is loose, there will be a reverse clearance. Then remove the fastening bolts from the motor of this shaft.
