230V Meat Mincer Motor, troubleshooting methods Meat grinder operation during the use of downtime
If the voltage is too low or the power is off, check whether the wiring is normal. If the meat mincer is used for a long time, the temperature control protection function will be automatically turned on and used again after stopping for about half an hour. When the product is used for the first few times, the motor emits a bad smell if it is a new motor that is used for the first time, it is normal. If it is used for many times, the meat grinder still emits the smell. Unplug the power supply and find after-sales maintenance. : Abnormal vibration or noise of meat mincer is not in place; Remove the material from the meat grinder and place it in place according to the instructions. Use voltage is too high; Check whether the electrical wiring is normal. The meat mincer is placed in an unstable position; The meat mincer will find a relatively stable plane to ensure its stable operation. Adding too much material, resulting in the normal operation of meat cutter; Close the meat mincer switch, turn off the power, open the cover to take out the excess material, and then cover the cover, continue to use after power.
