Micro Water Pump Special Motor

Micro Water Pump Special Motor

The micro water pump special motor is a small but efficient electric motor. Its working principle is very simple. It provides electrical energy through the power supply and converts the electrical energy into mechanical energy to drive the rotation of the water pump. Its main structure consists of stator, rotor, magnetic field and circuit. The power supply provides current to generate a magnetic field between the stator and the rotor, so that the rotor rotates, and then the power is transmitted to the water pump through a mechanical connection, thereby realizing the delivery of liquid.

product description

1. the micro water pump special motor is mainly composed of two parts: electrical part and mechanical part. Among them, the electrical part includes stator, winding, coil, capacitor and other parts; the mechanical part includes rotor, drive shaft, flywheel and other parts. When electricity is input into the motor through the power supply, it generates a magnetic field, which causes the rotor of the mechanical part to rotate, thereby generating mechanical energy.

2.the rotation direction of the rotor is determined by the direction of the electromagnetic field in the stator. The stator is made up of windings and a rotating iron core. When electricity is energized, a constantly changing magnetic field is generated in the iron core. Changes in the magnetic field cause the rotating iron core to generate AC electromagnetic induction, thereby rotating the rotor. The rotor is connected to the water pump shaft through the drive shaft, thereby driving the water pump to work normally.

3. the starting of the micro water pump special motor mainly relies on the assistance of capacitors. When the motor starts working, it needs some initial boost to help the rotor rotate. The capacitor stores a portion of the current, and when the motor starts, it releases this portion of the current to generate the initial rotational force. This boosting effect can reduce the starting current of the motor and extend the service life of the motor.

1.Features

1. Miniaturization: The micro water pump special motor is smaller than ordinary motors, which can effectively reduce the overall size of the micro water pump and increase its applicability and portability.

2. High efficiency: The micro water pump special motor can effectively improve the efficiency of the micro water pump, allowing it to complete water circulation, lifting and filtration more quickly. This high efficiency improves the cost-effectiveness and practicality of micro water pumps.

3. Long life: The micro water pump special motor is made of high-quality materials and has a longer service life and better durability, allowing the micro water pump to maintain ideal performance for a longer period of time.

4. Stability: The micro water pump special motor for micro water pump adopts a more scientific design and has higher stability and work efficiency. This feature can effectively reduce the failure rate and enable the micro water pump to operate stably for a long time.

5. Energy saving and environmental protection: Due to the more efficient performance of the micro water pump special motor, the energy consumption of the micro water pump is also effectively reduced, saving energy expenses. In addition, the special motor is made of environmentally friendly materials, causing minimal environmental pollution.

6. Silent operation: The micro water pump special motor adopts advanced technology and has lower noise operation, so that it will not cause interference to the indoor environment and bring convenience to home life.

2.Aplication 

micro water pump special motor are widely used in various types of small water pumps, including electric mosquito repellent liquid pumps, household water dispensers, air purifiers, medical infusion sets, automobile cooling circulation pumps, etc. At the same time, micro water pump special motors can also be used in other equipment that require miniaturization, high efficiency, quietness and other performance requirements.

3.Maintenance method

1. Pay attention to waterproofing

Since the micro water pump special motor is installed in the water, its biggest enemy is water. If exposed to water for a long time, the special motor of the micro water pump will rust and corrode, which will shorten its service life. Therefore, be sure to take good care of your micro water pump when using or cleaning it. When cleaning the water pump, be sure to remove the special motor for the water pump to prevent too much water from entering the pump body.

2.Normal Operation

Once the micro water pump special motor operates abnormally, it is likely to cause its motor to burn out or the gear to wear out and other faults. Therefore, timely detection and elimination of problems is one of the important links in daily maintenance. During the normal use of the water pump, pay attention to check whether there are abnormal noises or looseness in the special motor gears, bearings and other parts of the water pump, and perform maintenance in a timely manner.

3.Clean up regularly

Pump body cleaning is an important part of maintenance work, because cleaning can reduce pump body piston friction, short shaft separation, etc., reduce pump body wear and extend service life. Especially during the maintenance of bonsai and flowers, the water quality may be affected by organic matter. At this time, the pump body must be cleaned in time.

4. Periodic replacement

In order for the micro water pump special motor to work stably for a long time, it must be inspected, cleaned and replaced regularly. When using a special motor for micro water pumps, secondary maintenance methods should be followed: maintenance should be performed every six months or every 400 hours of use; major maintenance should be performed every year or every 1,600 hours of use.

Hot Tags: micro water pump special motor, China, manufacturers, suppliers, factory, wholesale, customized, quotation, discount, price, buy, cheap