1. band conveyor
The belt conveyor is mainly composed of two endpoint rollers and a closed conveyor belt covering it. The roller that turns the conveyor belt is called the drive roller (drive roller); the other roller that only changes the direction of movement of the conveyor belt is called the reversing roller. The drive drum is driven by the motor through the reducer, and the conveyor belt is dragged by the friction between the drive roller and the conveyor belt. The drive drum is generally installed at the unloading end to increase traction and conducive to drag. The material is fed by the feeding end and falls on the rotating conveyor belt, and is transported to the unloading end when driven by the friction of the conveyor belt.
Scope of application: it can be used for horizontal transportation or inclined transportation, very convenient to use, widely used in various modern industrial enterprises, such as: mine underground roadway, mine ground transportation system, open pit mining site and concentrator plant. According to the conveying process requirements of the single unit, it can be composed of multiple units or horizontally or inclined with other conveying equipment, to meet the needs of different forms of operation lines.
2. Drop suspension conveyor
The cumulative suspension conveyor is a kind of transportation equipment suitable for high production rate and flexible production system. It not only plays a transportation role, but also runs through the whole production line, integrating excellent process operation, storage and transportation functions in one. With the rapid development of modern logistics and transportation technology, the accumulated discharge type conveyor has been widely used in all walks of life, especially in the automobile manufacturing industry, the four-door assembly line, the engine assembly line, the whole vehicle assembly line, etc.
The working principle of the conveyor is through the engagement and removal of the trolley group and the conveyor chain pusher to realize the transport or stop the accumulation of the vehicle on the sling. According to the process requirements, can be divided into fast chain and slow chain (called process chain), fast chain is mainly used for vehicle transport or storage, according to the length of vehicles according to the length of the production line. The slow chain is mainly used for the whole vehicle assembly, and the beat of the production line is adjusted according to the production process station and the chain speed. At this time, the vehicle on the lifting gear can only be carried by the traction chain.
