The DC motor uses semiconductor switching devices to achieve electronic commutation, that is, electronic switching devices to replace the traditional contact commutator and brush. The utility model has the advantages of high reliability, no commutating spark and low mechanical noise, and is widely used in high-grade recording sets, video recorders, electronic instruments and automatic office equipment. The brushless DC motor consists of a permanent magnet rotor, a multi pole winding stator, a position sensor, etc. . Position Sensing according to the change of Rotor position, the current of the stator winding is commutated in a certain order, that is, the position of the Rotor Pole relative to the stator winding is detected, and the position sensing signal is generated at a certain position. The operating voltage of the stator winding is provided by the electronic switch circuit controlled by the position sensor output. There are three types of position sensors: Magnetic Sensor, photoelectric sensor and electromagnetic sensor. Non-brush DC motor for position sensors with magnetic sensitive elements, such as Houle elements, magnetic diodes, magnetic field sensitive diodes, magnetic resistors or application-specific integrated circuit, are mounted on stator assemblies, used to detect the permanent magnet, rotor rotation when the magnetic field changes. The brushless DC motor with photoelectric position sensor is equipped with photoelectric sensor in a certain position on the stator assembly, and the rotor is equipped with a shading plate, and the light source is light-emitting diode or small light bulb. As the rotor rotates, the photosensitive device on the stator will generate intermittent pulse signals at a certain frequency due to the action of the shading plate. When the position of the permanent magnet rotor is changed, the position of the permanent magnet rotor is changed, and the position of the permanent magnet rotor is changed, the position of the permanent magnet rotor is changed, the position of the permanent magnet rotor is changed, and the position of the permanent magnet rotor is changed, and the position of the permanent magnet rotor is changed, the electromagnetic effect will cause the electromagnetic sensor to produce high frequency modulation signal whose amplitude changes with the rotor position.






