Wholesale ventilation fan motors may be very familiar to us. They provide us with fresh air. With the development of technology, environmental protection fans have been widely developed recently. But what are the general applications of environmentally friendly fans?
Environmental protection fan—Application range of environmental protection fan: generate air convection and exhaust heat; reduce indoor temperature and increase indoor fresh air; reduce air conditioning load and increase cooling effect; extract roof moisture, mold, steam, and keep roof dry; replace heavy-duty electricity Exhaust fan, reduce the cost of support, save electricity bills, and reduce noise; suitable for factories, warehouses, building roofs, villas, patios, flower houses, livestock breeding, mine tunnels and all roof ventilation, ventilation, and air dispersing places.
Environmental protection fan does not need electricity, continuous operation is efficient and energy-saving, no noise, no sparks, and explosion-proof. Arc-shaped blades, there is a gap between each blade, and the blades complement each other when rotating to fill this gap. A large amount of rainwater is thrown along the circular pitch line, and a small amount of rainwater flows along the blades and falls on the roof without flowing into the turbine. Inside, the rotating turbine at the same time allows air to flow out of the gap between the blades, blocking rainwater from entering. The environmentally friendly unpowered fan adopts high-tech ball bearings, which are completely enclosed and always self-lubricating, so that it can rotate under a breeze below 3.2Km per hour. The turbo exhaust fan rotates continuously for 24 hours, and dust is not easy to adhere, even if it needs to be cleaned, it is very convenient. The rotary exhaust fan does not require maintenance or replacement parts, and provides absolutely excellent quality. Therefore, choosing a motorless turbo fan is the best guarantee for investors. The turbine exhaust machine is installed on the roof with the base and the total weight is about 15Kg/seat, which is quite light. When designing the load of the steel structure, it does not need to be considered. There is a gap between the blades and the light will enter the room from this, which can increase the illuminance by 5-10% and save electricity bills.
