Jun 30, 2020 Leave a message

wholesale motor universal

When a large number of wholesale motor universal are customized, it is inevitable to encounter some motor faults. For the small current grounding system, how to quickly find single-phase grounding faults, I will introduce some simple and feasible methods.

Change the neutral ground mode to find:

The distribution system adopts neutral grounding or arc suppression coil grounding mode, which has both advantages and disadvantages.In view of the "disadvantage" of the difficulty in fault finding and the resulting personal and property safety problems, users themselves are also making further consideration. There are mainly two solutions:

1 will be changed to the neutral point by small resistance grounding.After the transformation, the zero-sequence two-stage protection function of the outlet circuit breaker and the short-circuit fault indicator can basically solve the problem of about 70% grounding fault detection, but there are still about 30% middle-resistance and high-resistance grounding faults that are difficult to find, and there may be the problem of protection coordination with the line fuse.In this system, a better solution is to use digital fault indicator, the line zero sequence current (cable), line (overhead), the total current to ground insulation voltage (overhead), and other indicators of measuring data is sent by wireless communication network to dispatch system, through the comprehensive analysis of substation real-time and historical information, but the judge site location.

The neutral point is changed to small resistance + circuit breaker or medium resistance + high voltage contactor mode.The circuit breaker or high voltage contacter is usually in the position of separation. Only when the zero-sequence voltage of the system is detected to be elevated, the circuit breaker or high voltage contacter will be delayed closing. In a short time, the circuit breaker will become a small or medium resistance ground.In addition, since the on-off of the neutral resistance can be flexibly controlled, the on-off of the resistance can be controlled in a certain timing sequence after the action of the arc suppression coil, so that the protection device can operate or the ground fault indicator can identify the signal and indicate the ground current path.

0

Send Inquiry

whatsapp

teams

E-mail

Inquiry